Some of the links in this post are affiliate links. By using these links you can get what you need/want and help Amidst Mod to continue providing info and inspirations.
30 September 2011
Sandpiper Indian Wells
Talk about 2 in 1. Here I've found a great fickr photo stream that has cool MCM photos. Then along the way comes this very cool Mid-Century illustration of a William Krisel building. Now that's cool. Hope you enjoy it too.
Some of the links in this post are affiliate links. By using these links you can get what you need/want and help Amidst Mod to continue providing info and inspirations.
Some of the links in this post are affiliate links. By using these links you can get what you need/want and help Amidst Mod to continue providing info and inspirations.
27 September 2011
City Center Motel
One thing is for sure. In the world of tearing down old things, a number of people are working to document these places before they die. Darren Bradley is doing his part, and beautifully. Like with this cool Mid-Century Motel.
If you would like see more of these cool old motels, you might want to check out one of the following books.
If you would like see more of these cool old motels, you might want to check out one of the following books.
26 September 2011
Anaheim Convention Center Arena
You don't get to much more Space Age Modern than this. So, enjoy! I'm off to bed.
Simplified Woodworking: 2 Tone Coat Rack Prt-2 & 3
Here they are. Parts 2 and 3 of Simplified Woodworking Project: 2 Tone Coat Rack. However, before we get to far into this, I want to explain a couple of things.
First:
I just realized today that I had not gone over the part of how to cut the wood to the 7 inch height that I am using. Well, my suggestion would be this.
First, go get the plywood. If you do not plan on making/building multiple pieces of furniture, then just buy the pre-cut stuff from Lowes or HomeDepot. Now, I've found that generally speaking, Lowes has a better selection of plywood. Remember, I'm not talking about particle board (MDF), or Chip/Press board (OSB). I mean real plywood. Then go and read this link on how to make a straight edge for your circular saw. Measure down from the factory edge 7 inches on one of the corners of the 48 inch width, and then do the same on the other end. Using the straight edge again, cut the 24 inch by 48 inch board into a 7" ("=inches (just in case you didn't know)) by 30" board. Repeat until you have two boards of 7" x 30".
Second thing. Please remember that I live and build my furniture in Chile. Therefore, the wood I get here is not what is at your disposal. Here's what you can do though.
You really have a few options. One is that you can buy full sheets of plywood. Another, is that, sometimes the stores will sell half sheets of plywood that they cut for you. Also, (the best for a one time small project like this one) you can buy plywood in 2'x4' lengths. I know that at least Lowes sells these.
Now that you've thought about the sizing, it's time to think about the materials. There are a couple of easy options. Remember, there is nothing wrong with using pine plywood. Just remember that is scratches and dents really easy. That means that in less time your finished project could need to be repaired, or trashed. My personal preference while in the states is Birch Plywood or Red Oak. These would be great on this project. Birch would work wonderfully as the natural back piece, and the Red Oak would look very nice as the designed 2 layer piece.
You also can buy red oak in 2'x4' and 4'x8' plywood, just like the Birch. If you want a real 2 tone look that is 100% natural, buy one sheet of the Birch and one of the Red Oak. Using the Red Oak on top. However, if you want to save a little money, you can cut the 2'x4' Birch sheet into 2) 7"x30" pieces and stain one piece with a cherry, mohagony, ceder, or walnut stain. Just something to contrast the boards with.
If you choose to stain, just make sure you stain the top board after you cut the design out, and stain all the edges, and about an inch in to the back all around. This way it will be less noticeable that it was stained.
On to the Videos. Part 2 goes over cutting the front and back boards and drawing out the design, and part 3 is all about cutting the design out of the top board. To come shortly will be the finial videos of the project. These will include the sanding, fitting, assembly, and hanging. Please note that I have edited each video to make sure that they are easily accessible by task. Therefore, should you have any questions, you will be able to just watch the segment that you need.
Also, I promise that I am working to get the final videos edited and uploaded, but can not say what day I will have them ready. When they are ready, I will let you know thru this blog, my facebook, and my twitter. I hope that these videos help and inspire you to go out and build something of your own.
Video Part 2
Video Part 3
If you've missed Part 1 and don't know what this project is all about, you can see it here.
Also, if you are interested in seeing the last 3 parts, go here.
First:
I just realized today that I had not gone over the part of how to cut the wood to the 7 inch height that I am using. Well, my suggestion would be this.
First, go get the plywood. If you do not plan on making/building multiple pieces of furniture, then just buy the pre-cut stuff from Lowes or HomeDepot. Now, I've found that generally speaking, Lowes has a better selection of plywood. Remember, I'm not talking about particle board (MDF), or Chip/Press board (OSB). I mean real plywood. Then go and read this link on how to make a straight edge for your circular saw. Measure down from the factory edge 7 inches on one of the corners of the 48 inch width, and then do the same on the other end. Using the straight edge again, cut the 24 inch by 48 inch board into a 7" ("=inches (just in case you didn't know)) by 30" board. Repeat until you have two boards of 7" x 30".
Second thing. Please remember that I live and build my furniture in Chile. Therefore, the wood I get here is not what is at your disposal. Here's what you can do though.
You really have a few options. One is that you can buy full sheets of plywood. Another, is that, sometimes the stores will sell half sheets of plywood that they cut for you. Also, (the best for a one time small project like this one) you can buy plywood in 2'x4' lengths. I know that at least Lowes sells these.
Now that you've thought about the sizing, it's time to think about the materials. There are a couple of easy options. Remember, there is nothing wrong with using pine plywood. Just remember that is scratches and dents really easy. That means that in less time your finished project could need to be repaired, or trashed. My personal preference while in the states is Birch Plywood or Red Oak. These would be great on this project. Birch would work wonderfully as the natural back piece, and the Red Oak would look very nice as the designed 2 layer piece.
You also can buy red oak in 2'x4' and 4'x8' plywood, just like the Birch. If you want a real 2 tone look that is 100% natural, buy one sheet of the Birch and one of the Red Oak. Using the Red Oak on top. However, if you want to save a little money, you can cut the 2'x4' Birch sheet into 2) 7"x30" pieces and stain one piece with a cherry, mohagony, ceder, or walnut stain. Just something to contrast the boards with.
If you choose to stain, just make sure you stain the top board after you cut the design out, and stain all the edges, and about an inch in to the back all around. This way it will be less noticeable that it was stained.
On to the Videos. Part 2 goes over cutting the front and back boards and drawing out the design, and part 3 is all about cutting the design out of the top board. To come shortly will be the finial videos of the project. These will include the sanding, fitting, assembly, and hanging. Please note that I have edited each video to make sure that they are easily accessible by task. Therefore, should you have any questions, you will be able to just watch the segment that you need.
Also, I promise that I am working to get the final videos edited and uploaded, but can not say what day I will have them ready. When they are ready, I will let you know thru this blog, my facebook, and my twitter. I hope that these videos help and inspire you to go out and build something of your own.
Video Part 2
Video Part 3
If you've missed Part 1 and don't know what this project is all about, you can see it here.
Also, if you are interested in seeing the last 3 parts, go here.
25 September 2011
Fairmeadows Eichler
Keeping up with the month of Chimay Bleue. He never stops amazing. Click the pic and see his photo stream. You won't be disappointed.
Subscribe to:
Posts (Atom)